☜ Thiết Bị Phát Wifi Không Dây 300Mbps 802.11N / B / G ❈
0 Đánh Giá
Đã Bán 0
41
489.900₫
Mua ngay trên Shopee
Cài đặt Bigbuy360 ExtensionQuốc tế
Cập nhật: thứ hai 14/09/2026 lúc 06:49 CH
LỊCH SỬ GIÁ SẢN PHẨM
Đang tải lịch sử giá...
SO SÁNH GIÁ
MÔ TẢ SẢN PHẨM
🍄 300Mbps Wireless Wifi Repeater network Signal Range Extender 802.11N / B / G Wifi Access Point
🔥🔥🔥
~ ~ this device amplifies / captures / expands wifi network signal ~ ~
Wifi 802.11g is a wireless connection with maximum speed and jangkuan. Maximal speeds up to 300mb / s and also support the WLAN Network 2.4GHz.
You can replace this WiFi repeater function as an Access Point or a regular router.
Design Portable
Package CONTENTS.
The stuff you get in the product box:
1 x KexTech Wireless-N WiFi Repeater 300Mbps - WL0189
1 x LAN Cable
1 x Manual
Wifi portable for high speed repeater router booster signal, simple installlation and use, your connection will be more comfortable.
Specs:
● Power 802.11b: 17dBm ± 1.5 dBm
● 802.11G: 14dBm ± 1.5 dBm
● 802.11N: 14dBm ± 1.5 dBm
● Sensitivity 802.11b: - 83dBm / 802.11g: - 70dBm / 802.11n: - 68dBm
● 2X3Dbi antenna integrated antenna
● Distance Outdoors 300m, Indoor 100m (according to actual environmental change)
● Security - bit WEP, AES, TKIP, WPA, WPA2, 802.1x, WPA-PSK, WPA2-PSK, MAC, WDS
Software:
● Rfc768 User Datagram Protocol (UDP) standard version
● - 152-bit WEP.
● Wpa-Psk / WPA2-PSK, WPA / WPA2
● Bandwidth IP control function (router mode support)
● Dns relay (router mode support)
● Pass-Through VPN (Router mode support)
● Static router (router mode support)
● Static IP address allocation (router mode support)
Security:
● Ip settings and MAC addresses bind to attack A (Router mode support)
● Filtering IP address (Router mode support)
● Screening name (Router mode support)
● Mac address filtering (router mode support)
● Traffic system statistics
Hardware system:
● Port 1 x RJ45 Jack
● Wps Reset button
● Led 1 x LAN, 1 x WLAN, 1 x Power, 1 x WPS
● Chipset RTL8196E
● 16Mbps flash
● 128Mbps sdram
● Dc5V / 1A Internal power supply
● Eu plug
● Power consumption 2.3W
● Voltage / frequency / current VAC 50 / 60Hz, 0.1a max,
System requirements:
● Wlan access / client lines correspond to IEEE 802.11n / g / b.
● 110 ~ socket 230 volts.
● Wlan clients must support at least WPA encryption standards.
● Ipv4 / Address Resolution Protocol.
● The network name (SSID) of the WLAN access point must be set to "visible".
Environment
● Operational temperature: 0 degrees ~ 40 degrees
● Storage temperature: - 40 degrees ~ 70 degrees
● Relative humidity: 10% ~ 90% (Non condensation)
Note: Please check WiFi-Repeater according to factory default settings after you cannot download. 1.1 if you ma
🔥🔥🔥
💏🖲 Read compulsory notes before transactions
💏🖲 Check Stock before Order
💏🖲 The products that have been purchased cannot be returned
💏🖲 Do not accept any return & complaint in any form
💏🖲 300Mbps Wireless Wifi Repeater network Signal Range Extender 802.11N / B / G Wifi Access Point
🔥🔥🔥
~ ~ this device amplifies / captures / expands wifi network signal ~ ~
Wifi 802.11g is a wireless connection with maximum speed and jangkuan. Maximal speeds up to 300mb / s and also support the WLAN Network 2.4GHz.
You can replace this WiFi repeater function as an Access Point or a regular router.
Design Portable
Package CONTENTS.
The stuff you get in the product box:
1 x KexTech Wireless-N WiFi Repeater 300Mbps - WL0189
1 x LAN Cable
1 x Manual
Wifi portable for high speed repeater router booster signal, simple installlation and use, your connection will be more comfortable.
Specs:
● Power 802.11b: 17dBm ± 1.5 dBm
● 802.11G: 14dBm ± 1.5 dBm
● 802.11N: 14dBm ± 1.5 dBm
● Sensitivity 802.11b: - 83dBm / 802.11g: - 70dBm / 802.11n: - 68dBm
● 2X3Dbi antenna integrated antenna
● Distance Outdoors 300m, Indoor 100m (according to actual environmental change)
● Security - bit WEP, AES, TKIP, WPA, WPA2, 802.1x, WPA-PSK, WPA2-PSK, MAC, WDS
Software:
● Rfc768 User Datagram Protocol (UDP) standard version
● - 152-bit WEP.
● Wpa-Psk / WPA2-PSK, WPA / WPA2
● Bandwidth IP control function (router mode support)
● Dns relay (router mode support)
● Pass-Through VPN (Router mode support)
● Static router (router mode support)
● Static IP address allocation (router mode support)
Security:
● Ip settings and MAC addresses bind to attack A (Router mode support)
● Filtering IP address (Router mode support)
● Screening name (Router mode support)
● Mac address filtering (router mode support)
● Traffic system statistics
Hardware system:
● Port 1 x RJ45 Jack
● Wps Reset button
● Led 1 x LAN, 1 x WLAN, 1 x Power, 1 x WPS
● Chipset RTL8196E
● 16Mbps flash
● 128Mbps sdram
● Dc5V / 1A Internal power supply
● Eu plug
● Power consumption 2.3W
● Voltage / frequency / current VAC 50 / 60Hz, 0.1a max,
System requirements:
● Wlan access / client lines correspond to IEEE 802.11n / g / b.
● 110 ~ socket 230 volts.
● Wlan clients must support at least WPA encryption standards.
● Ipv4 / Address Resolution Protocol.
● The network name (SSID) of the WLAN access point must be set to "visible".
Environment
● Operational temperature: 0 degrees ~ 40 degrees
● Storage temperature: - 40 degrees ~ 70 degrees
● Relative humidity: 10% ~ 90% (Non condensation)
Note: Please check WiFi-Repeater according to factory default settings after you cannot download. 1.1 if you ma
🔥🔥🔥
💏🖲 Read compulsory notes before transactions
💏🖲 Check Stock before Order
💏🖲 The products that have been purchased cannot be returned
💏🖲 Do not accept any return & complaint in any form
💏🖲 300Mbps Wireless Wifi Repeater network Signal Range Extender 802.11N / B / G Wifi Access Point