Thiết bị lặp sóng Wifi không dây 300Mbps 802.11N/B/G
0 Đánh Giá
Đã Bán 0
77
732.400 đ
Xem sản phẩm trên Shopee
Cài đặt Bigbuy360 ExtensionQuốc tế
thứ tư 04/08/2021 lúc 06:50 CH
MÔ TẢ SẢN PHẨM
★★★
You can replace this WiFi repeater function as an Access Point or a regular router.
Design Portable
Package CONTENTS.
The stuff you get in the product box:
1 x KexTech Wireless-N WiFi Repeater 300Mbps - WL0189
1 x LAN Cable
Wifi portable for high speed repeater router booster signal, simple installlation and use, your connection will be more comfortable.
Specs:
● Power 802.11b: 17dBm ± 1.5 dBm
● 802.11G: 14dBm ± 1.5 dBm
● 802.11N: 14dBm ± 1.5 dBm
● 2X3Dbi antenna integrated antenna
● Security - bit WEP, AES, TKIP, WPA, WPA2, 802.1x, WPA-PSK, WPA2-PSK, MAC, WDS
Software:
● Rfc768 User Datagram Protocol (UDP) standard version
● - 152-bit WEP.
● Wpa-Psk / WPA2-PSK, WPA / WPA2
● Dns relay (router mode support)
● Pass-Through VPN (Router mode support)
● Static router (router mode support)
● Static IP address allocation (router mode support)
Security:
● Ip settings and MAC addresses bind to attack A (Router mode support)
● Filtering IP address (Router mode support)
● Screening name (Router mode support)
● Mac address filtering (router mode support)
● Traffic system statistics
Hardware system:
● Port 1 x RJ45 Jack
● Wps Reset button
● Led 1 x LAN, 1 x WLAN, 1 x Power, 1 x WPS
● Chipset RTL8196E
● 16Mbps flash
● 128Mbps sdram
● Dc5V / 1A Internal power supply
● Eu plug
● Power consumption 2.3W
● Voltage / frequency / current VAC 50 / 60Hz, 0.1a max,
System requirements:
● 110 ~ socket 230 volts.
● Wlan clients must support at least WPA encryption standards.
● Ipv4 / Address Resolution Protocol.
● The network name (SSID) of the WLAN access point must be set to "visible".
Environment
● Operational temperature: 0 degrees ~ 40 degrees
● Storage temperature: - 40 degrees ~ 70 degrees
● Relative humidity: 10% ~ 90% (Non condensation)
★★★
Note: It is mandatory to feedback and review if the booked item reaches the destination address. To support our team so that it can work better and be thorough again.
You can replace this WiFi repeater function as an Access Point or a regular router.
Design Portable
Package CONTENTS.
The stuff you get in the product box:
1 x KexTech Wireless-N WiFi Repeater 300Mbps - WL0189
1 x LAN Cable
Wifi portable for high speed repeater router booster signal, simple installlation and use, your connection will be more comfortable.
Specs:
● Power 802.11b: 17dBm ± 1.5 dBm
● 802.11G: 14dBm ± 1.5 dBm
● 802.11N: 14dBm ± 1.5 dBm
● 2X3Dbi antenna integrated antenna
● Security - bit WEP, AES, TKIP, WPA, WPA2, 802.1x, WPA-PSK, WPA2-PSK, MAC, WDS
Software:
● Rfc768 User Datagram Protocol (UDP) standard version
● - 152-bit WEP.
● Wpa-Psk / WPA2-PSK, WPA / WPA2
● Dns relay (router mode support)
● Pass-Through VPN (Router mode support)
● Static router (router mode support)
● Static IP address allocation (router mode support)
Security:
● Ip settings and MAC addresses bind to attack A (Router mode support)
● Filtering IP address (Router mode support)
● Screening name (Router mode support)
● Mac address filtering (router mode support)
● Traffic system statistics
Hardware system:
● Port 1 x RJ45 Jack
● Wps Reset button
● Led 1 x LAN, 1 x WLAN, 1 x Power, 1 x WPS
● Chipset RTL8196E
● 16Mbps flash
● 128Mbps sdram
● Dc5V / 1A Internal power supply
● Eu plug
● Power consumption 2.3W
● Voltage / frequency / current VAC 50 / 60Hz, 0.1a max,
System requirements:
● 110 ~ socket 230 volts.
● Wlan clients must support at least WPA encryption standards.
● Ipv4 / Address Resolution Protocol.
● The network name (SSID) of the WLAN access point must be set to "visible".
Environment
● Operational temperature: 0 degrees ~ 40 degrees
● Storage temperature: - 40 degrees ~ 70 degrees
● Relative humidity: 10% ~ 90% (Non condensation)
★★★
Note: It is mandatory to feedback and review if the booked item reaches the destination address. To support our team so that it can work better and be thorough again.
