Thiết bị lặp sóng WiFi không dây 300Mbps 802.11N/B/G 4)
0 Đánh Giá
Đã Bán 0
67
462.600₫
Mua ngay trên Shopee
Cài đặt Bigbuy360 ExtensionQuốc tế
Cập nhật: thứ bảy 19/09/2026 lúc 11:16 SA
LỊCH SỬ GIÁ SẢN PHẨM
Đang tải lịch sử giá...
SO SÁNH GIÁ
MÔ TẢ SẢN PHẨM
~ ~ this device amplifies / captures / expands wifi network signal ~ ~
Wifi 802.11g is a wireless connection with maximum speed and jangkuan. Maximal speeds up to 300mb / s and also support the WLAN Network 2.4GHz.
You can replace this WiFi repeater function as an Access Point or a regular router.
Package CONTENTS.
The stuff you get in the product box:
1 x KexTech Wireless-N WiFi Repeater 300Mbps - WL0189
1 x LAN Cable
1 x Manual
Specs:
● Power 802.11b: 17dBm ± 1.5 dBm
● 802.11G: 14dBm ± 1.5 dBm
● 802.11N: 14dBm ± 1.5 dBm
● Sensitivity 802.11b: - 83dBm / 802.11g: - 70dBm / 802.11n: - 68dBm
● Distance Outdoors 300m, Indoor 100m (according to actual environmental change)
● Security 64 / 128-bit WEP, AES, TKIP, WPA, WPA2, 802.1x, WPA-PSK, WPA2-PSK, MAC, WDS
Software:
● Rfc768 User Datagram Protocol (UDP) standard version
● 64 / 128 / 152-bit WEP
● Wpa-Psk / WPA2-PSK, WPA / WPA2
● Bandwidth IP control function (router mode support)
● Dns relay (router mode support)
● Pass-Through VPN (Router mode support)
● Static router (router mode support)
Security:
● Screening name (Router mode support)
● Traffic system statistics
Hardware system:
● Port 1 x RJ45 Jack
● Wps Reset button
● Led 1 x LAN, 1 x WLAN, 1 x Power, 1 x WPS
● Chipset RTL8196E
● 16Mbps flash
● 128Mbps sdram
● Dc5V / 1A Internal power supply
● Eu plug
● Power consumption 2.3W
● Voltage / frequency / current 100-240 VAC 50 / 60Hz, 0.1a max,
System requirements:
● Wlan access / client lines correspond to IEEE 802.11n / g / b.
● 110 ~ socket 230 volts.
● Wlan clients must support at least WPA encryption standards.
● The network name (SSID) of the WLAN access point must be set to "visible".
Environment
● Operational temperature: 0 degrees ~ 40 degrees
● Storage temperature: - 40 degrees ~ 70 degrees
● Relative humidity: 10% ~ 90% (Non condensation)
Note: Please check if WiFi-Repeater matches factory default settings after you cannot download 192,168.1.1
P.S.:
- it 's important to understand that buyers understand dang understand the title and description of the product first before clicking on the buy.
- if there 's anything less understandable buyers can contact our CS.
- the goods before the shipment we 've made sure the new goods function as useful and no defects whatsoever.
- after clicking on the buy we assume the buyer understands and understands what we 've explained above, click on the buy = agree, NO COMPLAIN NO return
~ ~ ~ ~ ~ ~ > > > to
Wifi 802.11g is a wireless connection with maximum speed and jangkuan. Maximal speeds up to 300mb / s and also support the WLAN Network 2.4GHz.
You can replace this WiFi repeater function as an Access Point or a regular router.
Package CONTENTS.
The stuff you get in the product box:
1 x KexTech Wireless-N WiFi Repeater 300Mbps - WL0189
1 x LAN Cable
1 x Manual
Specs:
● Power 802.11b: 17dBm ± 1.5 dBm
● 802.11G: 14dBm ± 1.5 dBm
● 802.11N: 14dBm ± 1.5 dBm
● Sensitivity 802.11b: - 83dBm / 802.11g: - 70dBm / 802.11n: - 68dBm
● Distance Outdoors 300m, Indoor 100m (according to actual environmental change)
● Security 64 / 128-bit WEP, AES, TKIP, WPA, WPA2, 802.1x, WPA-PSK, WPA2-PSK, MAC, WDS
Software:
● Rfc768 User Datagram Protocol (UDP) standard version
● 64 / 128 / 152-bit WEP
● Wpa-Psk / WPA2-PSK, WPA / WPA2
● Bandwidth IP control function (router mode support)
● Dns relay (router mode support)
● Pass-Through VPN (Router mode support)
● Static router (router mode support)
Security:
● Screening name (Router mode support)
● Traffic system statistics
Hardware system:
● Port 1 x RJ45 Jack
● Wps Reset button
● Led 1 x LAN, 1 x WLAN, 1 x Power, 1 x WPS
● Chipset RTL8196E
● 16Mbps flash
● 128Mbps sdram
● Dc5V / 1A Internal power supply
● Eu plug
● Power consumption 2.3W
● Voltage / frequency / current 100-240 VAC 50 / 60Hz, 0.1a max,
System requirements:
● Wlan access / client lines correspond to IEEE 802.11n / g / b.
● 110 ~ socket 230 volts.
● Wlan clients must support at least WPA encryption standards.
● The network name (SSID) of the WLAN access point must be set to "visible".
Environment
● Operational temperature: 0 degrees ~ 40 degrees
● Storage temperature: - 40 degrees ~ 70 degrees
● Relative humidity: 10% ~ 90% (Non condensation)
Note: Please check if WiFi-Repeater matches factory default settings after you cannot download 192,168.1.1
P.S.:
- it 's important to understand that buyers understand dang understand the title and description of the product first before clicking on the buy.
- if there 's anything less understandable buyers can contact our CS.
- the goods before the shipment we 've made sure the new goods function as useful and no defects whatsoever.
- after clicking on the buy we assume the buyer understands and understands what we 've explained above, click on the buy = agree, NO COMPLAIN NO return
~ ~ ~ ~ ~ ~ > > > to
