Tấm chắn bùn dành cho máy in 3D kích thước 200x200mm
1 Đánh Giá
2 Đã Bán
43
139.000 đ
Xem sản phẩm trên ShopeeQuốc tế
chủ nhật 11/07/2021 lúc 05:53 SA
2018 Upgrade 3D Printer Heatbed Plate Sheet: can install on a hoted bed and glass platform, fit for 7.8 inch*7.8 inch Printer Bed.
2 in 1 Plate: the A plate is flexible and magnetic, it is easy to move away from build platform and take away printed models, B plate with adhesive, stick on the build surface.
Please Kindly Note: the plate is magnetic, the temperature (recommended from 50 to 80 degrees centigrade) should not exceed 80 degrees. so It is work well for PLA, not suitable for ABS filament, or the platform will comes bent . if set heated beyond 80 degree, it will lose magnetism or turn bent.
Size: 200x200mm/ 7.8x7.8 inch
Feature：
Reuse, easy remove(it is better for removing when the plate is cooler);
Separation type bending to take the model. It's more convenient.
No need the beauty of paper and scraper to assist the model.
Print not warped edge. No glue is needed.
Can be printed on cold bed.
Colour: Black
material: plastic
Package Contents:1 x 200*200 magnetic sticker(including side A + side B)
Please kindly note:
If it doesn't stick, please don't worry, rotate the magnetic A side 90 degrees, match to the polarity.
Please level the build plate well before printing.
Please do not let heated nozzle Press the A plate directly !Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
2 in 1 Plate: the A plate is flexible and magnetic, it is easy to move away from build platform and take away printed models, B plate with adhesive, stick on the build surface.
Please Kindly Note: the plate is magnetic, the temperature (recommended from 50 to 80 degrees centigrade) should not exceed 80 degrees. so It is work well for PLA, not suitable for ABS filament, or the platform will comes bent . if set heated beyond 80 degree, it will lose magnetism or turn bent.
Size: 200x200mm/ 7.8x7.8 inch
Feature：
Reuse, easy remove(it is better for removing when the plate is cooler);
Separation type bending to take the model. It's more convenient.
No need the beauty of paper and scraper to assist the model.
Print not warped edge. No glue is needed.
Can be printed on cold bed.
Colour: Black
material: plastic
Package Contents:1 x 200*200 magnetic sticker(including side A + side B)
Please kindly note:
If it doesn't stick, please don't worry, rotate the magnetic A side 90 degrees, match to the polarity.
Please level the build plate well before printing.
Please do not let heated nozzle Press the A plate directly !Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.