Quạt Tản Nhiệt Dc 5v 12v 24v Cho Máy In 3d
1 Đánh Giá
3 Đã Bán
20
29.794 đ
Xem sản phẩm trên ShopeeQuốc tế
thứ sáu 19/11/2021 lúc 05:22 CH
#Cooling #Fan #Blower #DC #Turbo #Ball #Bearing #3D #Printer #Accessories #Wire #5V #12V #24V
Cooling Fan Blower DC Turbo Ball Bearing 3D Printer Accessories Wire 5V 12V 24V
100% brand new and high quality
Features:
Made of special and premium materials,it is high temperature resistant and extremely durable.
Guaranteed to continuously run 30,000 hours at 40℃.Speed: 6800±10%
Used in humidifier,aromatherapy and other small appliances series;small heat radiating communication equipment;military equipment;intelligent industrial control equipment plate cooling heat,high precision medical equipment cooling;PC CPU server cooling dissipation and so on.
Bearing Blower only, other accessories demo in the picture are not included!
Tips:
1. Do not touch the blade and the power cord around the fan or pull the power cord. The shaft and power cord will be damaged.
2. Please avoid dust, water droplets and small insects from entering, which will affect the life and defective products;
3. Do not use in flammable gases and any harmful environment;
4. Please use it within six months. Long-term storage will affect the performance of the fan due to the storage environment;
5. When the fan is running, do not attempt to lock the fan for a long time. This will cause the fan to burn out due to continuous stop and no heat.
6. When installing the fan, please pay special attention to the noise caused by resonance or vibration;
7. When the fan is dropped from a height of 60cm during handling or operation, it will have some influence on the balance of the blade, especially the ball bearing to avoid falling;
8. The torque of the screw of the lock case must not exceed 4Kgf; please do not use a screwdriver, iron rod, etc. to block the fan, this will damage the fan;
9. Please note that the fan will hurt your fingers when running at high speed.
Specification:
Connector: 2.45 Terminal
Dimension: 40x40x10mm/1.57x1.57x0.40in
Wire Length: 30cm(1.18in)
Voltage: 5V/12V/24V
Rated Current: 0.06A+5%
Type: Sleeve Bearing Bearing
Quantity: 1 Pc
Note:
1.No retail package.
2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package includes:
1 x Bearing Blower
Cooling Fan Blower DC Turbo Ball Bearing 3D Printer Accessories Wire 5V 12V 24V
100% brand new and high quality
Features:
Made of special and premium materials,it is high temperature resistant and extremely durable.
Guaranteed to continuously run 30,000 hours at 40℃.Speed: 6800±10%
Used in humidifier,aromatherapy and other small appliances series;small heat radiating communication equipment;military equipment;intelligent industrial control equipment plate cooling heat,high precision medical equipment cooling;PC CPU server cooling dissipation and so on.
Bearing Blower only, other accessories demo in the picture are not included!
Tips:
1. Do not touch the blade and the power cord around the fan or pull the power cord. The shaft and power cord will be damaged.
2. Please avoid dust, water droplets and small insects from entering, which will affect the life and defective products;
3. Do not use in flammable gases and any harmful environment;
4. Please use it within six months. Long-term storage will affect the performance of the fan due to the storage environment;
5. When the fan is running, do not attempt to lock the fan for a long time. This will cause the fan to burn out due to continuous stop and no heat.
6. When installing the fan, please pay special attention to the noise caused by resonance or vibration;
7. When the fan is dropped from a height of 60cm during handling or operation, it will have some influence on the balance of the blade, especially the ball bearing to avoid falling;
8. The torque of the screw of the lock case must not exceed 4Kgf; please do not use a screwdriver, iron rod, etc. to block the fan, this will damage the fan;
9. Please note that the fan will hurt your fingers when running at high speed.
Specification:
Connector: 2.45 Terminal
Dimension: 40x40x10mm/1.57x1.57x0.40in
Wire Length: 30cm(1.18in)
Voltage: 5V/12V/24V
Rated Current: 0.06A+5%
Type: Sleeve Bearing Bearing
Quantity: 1 Pc
Note:
1.No retail package.
2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package includes:
1 x Bearing Blower