Phụ Kiện Máy Đùn Kim Loại V6 J-Head Mk8 1.75mm / 3mm Cho Máy Đùn
0 Đánh Giá
0 Đã Bán
28
262.000 đ
Xem sản phẩm trên ShopeeQuốc tế
chủ nhật 23/05/2021 lúc 04:38 CH
2 set Accessories:1 set Golden Accessories & 1 set red black Accessories
High temperature & heat ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, stainless steel material nozzle throat and high quality resistance whose temperature can up to 280 °C, 12V high speed fan, lose heat quickly.Anti-leakage & anti-blocking design: nozzle and tube connect seamless, prevent material leaking and blocking
Easy to install: NTC connector with terminal, you can install directly.Compatibility: Compatible with all 1.75mm V6 3D printer.Used for 1.75mm/3mm filament Reprap, Makerbot, Prusa i3 3D printer.Full aluminum alloy material, the surface is sandblasted and oxidized.Nema 17 stepper motor is supported, the stepper motor is NOT included
Complete 3D printer bowden extruder includes ball bearing,spring,screws ,remote connectors and 50 teeth driver gear(bore 5mm).Main extruder body needs assembly, easy to install ,please refer to picture 7
IMPROVED VERSION, equipped with 2 pneumatic fittings, so it feeds more smoothly. You can make your extruder closer to the printhead (reducing brushed remote feeding problems arising from this can to some extent), while the supplies can be placed in a more appropriate position, and not worry about other issues stuck supplies
Attention: Small parts, keep away from children
Type : Extruder Brass Nozzle Print Head + right hand
Input Diameter: 1.75mm
Output Diameter: 0.3mm 0.4mm 0.5mm
Color: black + red + Golden
Warm Tips:
1.The holes are large enough for 3mm filament
2. MK8 remote bowden extruder fits a standard pneumatic tubing quick connect fitting, for 4mm PTFE tubing
3. Don't over tighten tension ,or the filament will not feed
4. Getting the old gear off the motor was a pain, use a little heat and it will come right off.
Material:Metal + stainless steel + brass
Package included:
1 x MK8 Extruder Kits (RIGHT hand version)
1 x All Metal V6 hotend 12V/40W/1.75mm/0.4mm Nozzle / Extruder
1 x 12V high speed fan with shroud
1 x One meter long PTFE/PTFE tubing 4mm OD 2mm ID
1 X Pneumatic fittings
2 x 1.75mm Stainless Steel Nozzles Throat with PTFE Tube
1 x 0.3mm Nozzle Print Head
3 x 0.4mm Nozzle Print Head
1 x 0.5mm Nozzle Print Head
1 x M3 Hex driver.
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
High temperature & heat ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, stainless steel material nozzle throat and high quality resistance whose temperature can up to 280 °C, 12V high speed fan, lose heat quickly.Anti-leakage & anti-blocking design: nozzle and tube connect seamless, prevent material leaking and blocking
Easy to install: NTC connector with terminal, you can install directly.Compatibility: Compatible with all 1.75mm V6 3D printer.Used for 1.75mm/3mm filament Reprap, Makerbot, Prusa i3 3D printer.Full aluminum alloy material, the surface is sandblasted and oxidized.Nema 17 stepper motor is supported, the stepper motor is NOT included
Complete 3D printer bowden extruder includes ball bearing,spring,screws ,remote connectors and 50 teeth driver gear(bore 5mm).Main extruder body needs assembly, easy to install ,please refer to picture 7
IMPROVED VERSION, equipped with 2 pneumatic fittings, so it feeds more smoothly. You can make your extruder closer to the printhead (reducing brushed remote feeding problems arising from this can to some extent), while the supplies can be placed in a more appropriate position, and not worry about other issues stuck supplies
Attention: Small parts, keep away from children
Type : Extruder Brass Nozzle Print Head + right hand
Input Diameter: 1.75mm
Output Diameter: 0.3mm 0.4mm 0.5mm
Color: black + red + Golden
Warm Tips:
1.The holes are large enough for 3mm filament
2. MK8 remote bowden extruder fits a standard pneumatic tubing quick connect fitting, for 4mm PTFE tubing
3. Don't over tighten tension ,or the filament will not feed
4. Getting the old gear off the motor was a pain, use a little heat and it will come right off.
Material:Metal + stainless steel + brass
Package included:
1 x MK8 Extruder Kits (RIGHT hand version)
1 x All Metal V6 hotend 12V/40W/1.75mm/0.4mm Nozzle / Extruder
1 x 12V high speed fan with shroud
1 x One meter long PTFE/PTFE tubing 4mm OD 2mm ID
1 X Pneumatic fittings
2 x 1.75mm Stainless Steel Nozzles Throat with PTFE Tube
1 x 0.3mm Nozzle Print Head
3 x 0.4mm Nozzle Print Head
1 x 0.5mm Nozzle Print Head
1 x M3 Hex driver.
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.