Ống Xả Nhiệt V6 24v 1.75m 4.1 Cho Máy Đùn 1m Ptfe
0 Đánh Giá
Đã Bán 0
122
184.000₫
Mua ngay trên Shopee
Cài đặt Bigbuy360 ExtensionQuốc tế
Cập nhật: thứ sáu 18/09/2026 lúc 07:46 SA
LỊCH SỬ GIÁ SẢN PHẨM
Đang tải lịch sử giá...
SO SÁNH GIÁ
MÔ TẢ SẢN PHẨM
Nozzle Size:0.4mm for 1.75mm Fliament
Thermistor: 100K, NTC 3950, 1 meter wire
PTFE tube:ID2 OD4mm
Heater wire:40W, 1meter wire.
Type:24V / 12V
V6 Throat Tube : bore 4.1MM
V6 Heat Cooling Tube:connection thread M7
Cooling Fan:30 x 30 x 10mm ,2 Pin ,30cm wire ,with Bracket
V6 Pneumatic Fittings:4mm for 1.75mm filament guiding tube - ID2mm OD4mm PTFE tube use ,
Thread: 1/8 inch
Heating Block: 20 x 16 x 12mm
Material:metal
colour:As shown
Package Contents:
1 x full set of for E3D V6 (0.4mm)
4 x nozzles (0.2 / 0.3 / 0.6 / 1.0 mm)
2 x silicone sleeve
1 x hose
1 x heating block
1 x 2.0mm hexagon wrench
1 x 7mm wrench
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Thermistor: 100K, NTC 3950, 1 meter wire
PTFE tube:ID2 OD4mm
Heater wire:40W, 1meter wire.
Type:24V / 12V
V6 Throat Tube : bore 4.1MM
V6 Heat Cooling Tube:connection thread M7
Cooling Fan:30 x 30 x 10mm ,2 Pin ,30cm wire ,with Bracket
V6 Pneumatic Fittings:4mm for 1.75mm filament guiding tube - ID2mm OD4mm PTFE tube use ,
Thread: 1/8 inch
Heating Block: 20 x 16 x 12mm
Material:metal
colour:As shown
Package Contents:
1 x full set of for E3D V6 (0.4mm)
4 x nozzles (0.2 / 0.3 / 0.6 / 1.0 mm)
2 x silicone sleeve
1 x hose
1 x heating block
1 x 2.0mm hexagon wrench
1 x 7mm wrench
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.