Màn Hình Lcd 4.3 Inch Cho Xe Hơi
0 Đánh Giá
Đã Bán 0
65
292.500 đ
Xem sản phẩm trên Shopee
Cài đặt Bigbuy360 ExtensionQuốc tế
thứ năm 13/05/2021 lúc 10:01 CH
MÔ TẢ SẢN PHẨM
Description:
Foldable 4.3 Inch Car Reversing Digital LCD Display
This foldable 4.3 Inch Car Reversing Digital LCD Display is intended as a supplemental device to assist the driver by presenting a crisp and clear behind-the-vehicle view on a high-resolution LCD display while backing up. The LCD display is easily foldable (when not in use) such that it will be well protected against dust, dirt, bumps, scratches or whatsoever. For convenience’s sake, after being installed, this monitor system will start up automatically when you’re backing up. Safety is never a sure thing, yet, believe it or not, this system will surely enhance it.
AV signal auto detect.
Auto power off when fold up the screen.
Auto switch when reversing.
Foldable design, compact size.
Low power consumption.
Easy installation, just put on the flat place you want.
High-definition and wide viewing angle.
Applicable to variety of vehicles: car, truck, RV, mini-van etc.
Type: Camera Monitor
Shell Material: ABS
Type: digital TFT LCD
Display size: 4.3 inches
Display format: 16 : 9
Power: DC 9 ~ 36V
Pixel: 480 (W) x 272 (H)
Format: PAL / NTSC
Connectivity : Wire
Power: 3W
Operating voltage: DC 12V
Operating Temperature: -20 to 60 Degree
Some tips about installation
The monitor with flexible mounting pad and 3M tape mounts on either the vehicle windshield or dashboard.
Choose a suitable monitor location in your vehicle that will not block your view for safe driving.
Clean the mounting area you’ve chosen with a quality glass cleaner or alcohol to remove any dirt or residue.
Peel off the protective film from the 3M adhesive mounting pad on the bottom of the monitor bracket and then affix the pad to the desired location. (NB: Once put in place, the mounting pad cannot be easily removed. Therefore, before mounting, please be sure of your desired location.)
Connect the power cable to the monitor cable.
Conceal the monitor cable behind the windshield trim piece and then continue along under the head liner to the rear of the vehicle.
Package Contents:
1 x Foldable 4.3 Inch Car Reversing Digital LCD Display,
1 x Power Cable,
1x Double-sided adhesive
1 x Bilingual User Manual in English
Foldable 4.3 Inch Car Reversing Digital LCD Display
This foldable 4.3 Inch Car Reversing Digital LCD Display is intended as a supplemental device to assist the driver by presenting a crisp and clear behind-the-vehicle view on a high-resolution LCD display while backing up. The LCD display is easily foldable (when not in use) such that it will be well protected against dust, dirt, bumps, scratches or whatsoever. For convenience’s sake, after being installed, this monitor system will start up automatically when you’re backing up. Safety is never a sure thing, yet, believe it or not, this system will surely enhance it.
AV signal auto detect.
Auto power off when fold up the screen.
Auto switch when reversing.
Foldable design, compact size.
Low power consumption.
Easy installation, just put on the flat place you want.
High-definition and wide viewing angle.
Applicable to variety of vehicles: car, truck, RV, mini-van etc.
Type: Camera Monitor
Shell Material: ABS
Type: digital TFT LCD
Display size: 4.3 inches
Display format: 16 : 9
Power: DC 9 ~ 36V
Pixel: 480 (W) x 272 (H)
Format: PAL / NTSC
Connectivity : Wire
Power: 3W
Operating voltage: DC 12V
Operating Temperature: -20 to 60 Degree
Some tips about installation
The monitor with flexible mounting pad and 3M tape mounts on either the vehicle windshield or dashboard.
Choose a suitable monitor location in your vehicle that will not block your view for safe driving.
Clean the mounting area you’ve chosen with a quality glass cleaner or alcohol to remove any dirt or residue.
Peel off the protective film from the 3M adhesive mounting pad on the bottom of the monitor bracket and then affix the pad to the desired location. (NB: Once put in place, the mounting pad cannot be easily removed. Therefore, before mounting, please be sure of your desired location.)
Connect the power cable to the monitor cable.
Conceal the monitor cable behind the windshield trim piece and then continue along under the head liner to the rear of the vehicle.
Package Contents:
1 x Foldable 4.3 Inch Car Reversing Digital LCD Display,
1 x Power Cable,
1x Double-sided adhesive
1 x Bilingual User Manual in English
