DIY KIT 3.3V/5V Ceramic Piezo Vibration Sensor Module Analog Controller Components Supplies Sensor for Arduino UNO R3
3 Đánh Giá
Đã Bán 70
318
13.230 đ
Mua ngay trên Shopee
Cài đặt Bigbuy360 ExtensionQuốc tế
Cập nhật: thứ năm 23/07/2026 lúc 05:13 SA
LỊCH SỬ GIÁ SẢN PHẨM
Đang tải lịch sử giá...
SO SÁNH GIÁ
MÔ TẢ SẢN PHẨM
DIY KIT 3.3V/5V Ceramic Piezo Vibration Sensor Module Analog Controller Electronic Components Supplies Sensor for Arduino UNO R3
When the piezoelectric ceramic shocking will generate an electrical signal, Controller analog port can be perceived slight vibration signals,Also can be realized with vibration interactions related works, such as electronic drums.
Working Voltage: 3.3V or 5V.
Working Current: <1mA.
Interface Type: Analog Output.
Size: 30mm x 23mm.Weight: 5g.
Specifications:
Operating Temperature Range: -10 ~ + 70
GPIO: S; signal output, +; power supply (VCC), -; ground (GND).
Input: Positive electrode of the piezoelectric ceramic.
Gnd: Negative electrode of the piezoelectric ceramic.
S-port is connected with the controller's analog input pin.
5V and GND are respectively connected the power supply of + 5V and GND.
Input and Gnd are already connected with the piezoelectric ceramics' positive and negative.
Package:
1 x Ceramic Piezo Vibration Senso
#DIY KIT 3.3V/5V Ceramic Piezo Vibration Sensor Module Analog Controller Electronic Components Supplies Sensor for Arduino UNO R3
When the piezoelectric ceramic shocking will generate an electrical signal, Controller analog port can be perceived slight vibration signals,Also can be realized with vibration interactions related works, such as electronic drums.
Working Voltage: 3.3V or 5V.
Working Current: <1mA.
Interface Type: Analog Output.
Size: 30mm x 23mm.Weight: 5g.
Specifications:
Operating Temperature Range: -10 ~ + 70
GPIO: S; signal output, +; power supply (VCC), -; ground (GND).
Input: Positive electrode of the piezoelectric ceramic.
Gnd: Negative electrode of the piezoelectric ceramic.
S-port is connected with the controller's analog input pin.
5V and GND are respectively connected the power supply of + 5V and GND.
Input and Gnd are already connected with the piezoelectric ceramics' positive and negative.
Package:
1 x Ceramic Piezo Vibration Senso
#DIY KIT 3.3V/5V Ceramic Piezo Vibration Sensor Module Analog Controller Electronic Components Supplies Sensor for Arduino UNO R3