Đầu Phun 0.4mm 1.75mm Cho Máy In 3d Reprap
0 Đánh Giá
Đã Bán 0
71
54.000 đ
Xem sản phẩm trên Shopee
Cài đặt Bigbuy360 ExtensionQuốc tế
chủ nhật 23/05/2021 lúc 04:45 CH
MÔ TẢ SẢN PHẨM
Stainless updated barrel tube for trouble free,low friction print,much solid quality,Pre-wired NTC3950 thermistor to the updated heater block,Use it with heatsink or cooled metal base,Plenty of MK8 clone nozzles compatible with this hotend - nozzle replacement is easy
12V version with 40W heater cable.DIY 3D printer extruder hotend requires heat sink to operate properly - metal base,aluminum block,or any other type of cooling device.Thermistor mounted with clamping screws
30mm long stainless updated barrel tube,for low friction,trouble free print.Nozzle is can be exchanged or replaced with many different types of nozzles in the market.
NTC 3950 100K pre-wired thermistor.
Color:color as shown
material:metal
Package Contents:
1 * 0.3mm brass nozzle
1 * Stainless updated barrel tube
1 * Aluminum updated heater block with necessary screws
1 * 12V 40W Cartridge Heater Cable
1 * NTC 3950 Pre-wired thermistorOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
12V version with 40W heater cable.DIY 3D printer extruder hotend requires heat sink to operate properly - metal base,aluminum block,or any other type of cooling device.Thermistor mounted with clamping screws
30mm long stainless updated barrel tube,for low friction,trouble free print.Nozzle is can be exchanged or replaced with many different types of nozzles in the market.
NTC 3950 100K pre-wired thermistor.
Color:color as shown
material:metal
Package Contents:
1 * 0.3mm brass nozzle
1 * Stainless updated barrel tube
1 * Aluminum updated heater block with necessary screws
1 * 12V 40W Cartridge Heater Cable
1 * NTC 3950 Pre-wired thermistorOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
