Công tắc điều khiển từ xa không dây DC12V 315/433MHz cho xe hơi xe máy
0 Đánh Giá
Đã Bán 0
62
70.471 đ
Xem sản phẩm trên Shopee
Cài đặt Bigbuy360 ExtensionQuốc tế
thứ ba 14/12/2021 lúc 03:51 CH
MÔ TẢ SẢN PHẨM
#DC12V #Wireless #Remote #Control #Switch #315/433MHz #Transmitter #Receiver #for #House #Mall #Electronic #Mobile #Cars #Motorcycle
DC12V Wireless Remote Control Switch 315/433MHz Transmitter Receiver for House Mall Electronic Mobile Cars Motorcycle Door Use
Description:
100% brand new and high quality.
Features:
Three output working modes for choosing.
Safe and flexible for operation and install.
Widely use in house, mall, electromobile, cars, motorcycle anti-theft alarm system or other control systems.
Specified as preferred components in remote control garage, roller curtain, door locks, remote sensing, telemetry, industrial control and wireless security alarm industry.
Transmitter and Receiver only, other accessories demo in the picture is not included!
Specifications:
Item Type: Transmitter+Receiver
Working Voltage: DC12V
Material: ABS
Size: Receiver: 41x41x26mm/1.6x1.6x1.02in, Remote Control: 34x58x15mm/1.3x2.2x0.5in
Color: Black
Transmission Frequency: 315MHZ, 433MHZ
Working Temperature: -30-70℃/-22-158℉
Transmission Sensitivity: equal to and greater than -105DBM
Coding Mode: smart learning code
Quantity: 1 Pc
Output working way:
Jog/Non-locked: Press a button is working/on and loosen your finger on the same button is stop/off. (A channel change needs a remote control button)
Auto-lock: Press one button for one time is working/on and press the same button is stop/off. (A channel change needs a remote control button)
Inter-lock/locked: Press a button is working/on and press another button is stop/off. (A channel change needs 2 remote control buttons)
Learning and removing method:
1. Learning method: Press the learning code for 3 seconds. The indicator will be off, and then loosen your finger, press any button of the remote control to transmit signal, the indicator flash 3 times and then normally on which means you learn it successfully.
2. Remove/clean method: Press the learning button about 8 seconds, the indicator will be from being off to on all the time, it means the information that you keep have been removed successfully.
Note:
No retail package.
Transition: 1cm=10mm=0.39inch
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Includes:
1 x Receiver(with Box)
1 x Transmitter
DC12V Wireless Remote Control Switch 315/433MHz Transmitter Receiver for House Mall Electronic Mobile Cars Motorcycle Door Use
Description:
100% brand new and high quality.
Features:
Three output working modes for choosing.
Safe and flexible for operation and install.
Widely use in house, mall, electromobile, cars, motorcycle anti-theft alarm system or other control systems.
Specified as preferred components in remote control garage, roller curtain, door locks, remote sensing, telemetry, industrial control and wireless security alarm industry.
Transmitter and Receiver only, other accessories demo in the picture is not included!
Specifications:
Item Type: Transmitter+Receiver
Working Voltage: DC12V
Material: ABS
Size: Receiver: 41x41x26mm/1.6x1.6x1.02in, Remote Control: 34x58x15mm/1.3x2.2x0.5in
Color: Black
Transmission Frequency: 315MHZ, 433MHZ
Working Temperature: -30-70℃/-22-158℉
Transmission Sensitivity: equal to and greater than -105DBM
Coding Mode: smart learning code
Quantity: 1 Pc
Output working way:
Jog/Non-locked: Press a button is working/on and loosen your finger on the same button is stop/off. (A channel change needs a remote control button)
Auto-lock: Press one button for one time is working/on and press the same button is stop/off. (A channel change needs a remote control button)
Inter-lock/locked: Press a button is working/on and press another button is stop/off. (A channel change needs 2 remote control buttons)
Learning and removing method:
1. Learning method: Press the learning code for 3 seconds. The indicator will be off, and then loosen your finger, press any button of the remote control to transmit signal, the indicator flash 3 times and then normally on which means you learn it successfully.
2. Remove/clean method: Press the learning button about 8 seconds, the indicator will be from being off to on all the time, it means the information that you keep have been removed successfully.
Note:
No retail package.
Transition: 1cm=10mm=0.39inch
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Includes:
1 x Receiver(with Box)
1 x Transmitter
