Card Chuyển Đổi Pci Express Sang Sata 3.0 4 Cổng Sata Iii 6g
0 Đánh Giá
0 Đã Bán
45
364.000 đ
Xem sản phẩm trên ShopeeQuốc tế
thứ hai 09/08/2021 lúc 11:46 CH
The method of using PCIE to SATA3.0 adapter card is as follows:1. Connection conditions and solutions of system disk and PCIE to SATA3.0 adapter card:a. The SATA interface e of PCIE to SATA3.0 is AHCI e. If you want to insert the system disk on our card, the premise is that your system disk must be installed in AHCI e when installing the system on the motherboard. Otherwise, you can't start the system through our card transfer card.
b. If we confirm that the SATA interface installation system is AHCI e, we can insert the hard disk directly into our card, and then enter the main board BIOS to set the system disk as the first boot.
c. Both of the above conditions are available. If the hard disk interface of the motherboard can not be started or restarted repeatedly, it may be due to the conflict between the motherboard's hard disk interface and our adapter card. The solution is to enter the motherboard BIOS, set the motherboard's hard disk interface option as Disabled, and save the restart to start the system.
Specification:
Meets Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0
Compliant with PCI-Express v2.0 specification, backward compatible with PCI-Express v1.0.
Supports communication speeds of 6.0 Gbps, 3.0 Gbps, and 1.5 Gbps
Support Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i.
Supports Four SATA
Support AHCI1.0 e and IDE e
Support native command queue (NCQ)
Supports FIS based on port multiplier switches or command switches.
Hot-swappable and hot-swappable.
Compatible with SATA6G, 3G and 1.5G Hard Drives
Bus interface: PCI-Express x1 slot(Compatible PCI-E X2 X4 X8 X16 )
Extension ports: 4 SATA3.0 interfaces
Feature: with two heat sinks for long time safe working.
System Requirements:
Windows 10/8/7 (32/64 bit) / Vista (32/64 bit)/ XP/2003/2008/linux
colour:black
Material:plastic
size:8.5x6cm
Package Contents:
1 x PCI-E TO 4 SATA Expansion Card
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
b. If we confirm that the SATA interface installation system is AHCI e, we can insert the hard disk directly into our card, and then enter the main board BIOS to set the system disk as the first boot.
c. Both of the above conditions are available. If the hard disk interface of the motherboard can not be started or restarted repeatedly, it may be due to the conflict between the motherboard's hard disk interface and our adapter card. The solution is to enter the motherboard BIOS, set the motherboard's hard disk interface option as Disabled, and save the restart to start the system.
Specification:
Meets Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0
Compliant with PCI-Express v2.0 specification, backward compatible with PCI-Express v1.0.
Supports communication speeds of 6.0 Gbps, 3.0 Gbps, and 1.5 Gbps
Support Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i.
Supports Four SATA
Support AHCI1.0 e and IDE e
Support native command queue (NCQ)
Supports FIS based on port multiplier switches or command switches.
Hot-swappable and hot-swappable.
Compatible with SATA6G, 3G and 1.5G Hard Drives
Bus interface: PCI-Express x1 slot(Compatible PCI-E X2 X4 X8 X16 )
Extension ports: 4 SATA3.0 interfaces
Feature: with two heat sinks for long time safe working.
System Requirements:
Windows 10/8/7 (32/64 bit) / Vista (32/64 bit)/ XP/2003/2008/linux
colour:black
Material:plastic
size:8.5x6cm
Package Contents:
1 x PCI-E TO 4 SATA Expansion Card
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.