Bộ khuếch đại tín hiệu không dây 300M thiết kế mới

AP mode: Wired to wireless: You can access the Internet directly without dialing after the network cable is connected to the computer, such as hotels, apartments, rental houses, offices, sharing broadband with neighbors, etc., just plug the network cable that has been connected to the repeater The network port can convert wired to wireless use. No need to set up plug and play.

New function of the equipment: judge whether the position of the repeater is suitable by the color of the indicator light, green means the position is suitable, orange signal is poor but it can be used, gray means the position is not good, and there is no signal

Features:
-Two working modes of relay and AP, mobile phone/tablet/computer can be set, only need to set once, all wireless devices can be used;
-Wireless standard IEEE802.11 b/g/n
-Transmission frequency: 2.4GHz~2.4835GHz
-Support WPA2, WPA and WEP9 (128/64)
-Simple setting wizard software interface
-WPS one-key encryption, effective anti rubbing network
Package weight: 178g
Carton size: 118x68x118mm

Packaging accessories:
WIFI wireless repeater x1
English manual x 1
RJ45 network cable x 1

-Product advantages:

3.1 Adding a few signal lights can quickly determine the network status and find the location of the network failure

3.1.1 The indicator light is green, indicating that the external network is normal, while the indicator is gray, the external network is disconnected and the Internet cannot be accessed.

3.1.2 If the indicator light is green, it means that the connection signal with the upper-level router is good. If the indicator light is yellow, it means that the signal signal connected to the upper-level router is poor and needs to be adjusted to a suitable position.

The router cannot be connected and needs to be adjusted to a position closer to the upper-level router.



3.1 The signal is good, easy to use, you can connect to the upper-level router with one key through the wps button



At present, the wps button of the repeater on the market is mainly automatically paired with the mobile phone of the user side. Our device is automatically paired with the upper-level router through the wps. After pressing the wps of the repeater and the upper-level router at the same time within 120 seconds, Two devices can be paired automatically without any settings, and it is very simple to use.



-Application scope/use scenarios Offices, supermarkets, schools, homes, factories, Internet cafes, etc.