Bộ Điều Khiển Từ Xa Không Dây 2262 / 2272 4 Kênh 315mhz Cho Arduino
4 Đánh Giá
Đã Bán 6
67
38.000 đ
Xem sản phẩm trên Shopee
Cài đặt Bigbuy360 ExtensionQuốc tế
thứ năm 29/04/2021 lúc 09:03 CH
MÔ TẢ SẢN PHẨM
Estimated delivery time for this product is 7-9 days
Remote control
1. Operating voltage: PCB (battery 27A / 12V x1)
2. Operating current: 10mA @ 12V
3. Power boost: 10 mw @ 12V
4. Modulation mode: ASK (Amplitude modulation)
5. Signaling frequency: 315MHZ
6. Transmission distance: 50-100M (Open field, receiver sensitivity is -100dbm)
7. Encoder type: fixed code
With decoding board
1. Operating voltage DC5V, receiver sensitivity is -98db. Pin 7 bits, respectively, VT, D3, D2, D1, D0, +5 V and GND. VT is a valid signal high output pin. When receiving a valid signal, the output pin has a high signal, relays can also be controlled.
2. Size: 6.6 * 22 * 41mm
There are four buttons on the remote control and corresponding four data bits for the output pins of the receiving board D0, D1, D2 and D3. Press the signal transmission buttons, the data bit corresponds to the high signal output.
Package includes:
1 x IC2262 / 2272 4 channels
1 x 4-Key Wireless Remote Controller for Arduino
#IC # 2262 # 2272 # 4 Channel # 315Mhz #Key #Wireless #Remote
Control #Receiver module #arduino
Before buying:
1. All goods have stock, we will arrange shipment immediately if we get your order.
2. Please read product description, if you have any questions, don't hesitate to contact us.
3. No warranty, if you receive a defective item, please contact us with the item photos.
After buying:
1.If you are satisfied give us 5 stars praise.
2. Please contact us first before you give us a bad review. We are very helpful and will resolve the issues.
If you receive a defective product, please contact us together with the photo or video
Remote control
1. Operating voltage: PCB (battery 27A / 12V x1)
2. Operating current: 10mA @ 12V
3. Power boost: 10 mw @ 12V
4. Modulation mode: ASK (Amplitude modulation)
5. Signaling frequency: 315MHZ
6. Transmission distance: 50-100M (Open field, receiver sensitivity is -100dbm)
7. Encoder type: fixed code
With decoding board
1. Operating voltage DC5V, receiver sensitivity is -98db. Pin 7 bits, respectively, VT, D3, D2, D1, D0, +5 V and GND. VT is a valid signal high output pin. When receiving a valid signal, the output pin has a high signal, relays can also be controlled.
2. Size: 6.6 * 22 * 41mm
There are four buttons on the remote control and corresponding four data bits for the output pins of the receiving board D0, D1, D2 and D3. Press the signal transmission buttons, the data bit corresponds to the high signal output.
Package includes:
1 x IC2262 / 2272 4 channels
1 x 4-Key Wireless Remote Controller for Arduino
#IC # 2262 # 2272 # 4 Channel # 315Mhz #Key #Wireless #Remote
Control #Receiver module #arduino
Before buying:
1. All goods have stock, we will arrange shipment immediately if we get your order.
2. Please read product description, if you have any questions, don't hesitate to contact us.
3. No warranty, if you receive a defective item, please contact us with the item photos.
After buying:
1.If you are satisfied give us 5 stars praise.
2. Please contact us first before you give us a bad review. We are very helpful and will resolve the issues.
If you receive a defective product, please contact us together with the photo or video
