Bộ Điều Khiển Nhiệt Độ Mks Mos 30a Cho Máy In 3d
0 Đánh Giá
Đã Bán 0
81
203.000 đ
Xem sản phẩm trên Shopee
Cài đặt Bigbuy360 ExtensionQuốc tế
chủ nhật 23/05/2021 lúc 04:49 CH
MÔ TẢ SẢN PHẨM
It can be controlled by 5-24v digital signal.
MOS tube with excellent performance.
Large heat sink, the maximum current can reach more than 30A.
You can directly use the hot bed output signal control of Ramp1.4 and MKS series motherboards
Power a big heat elements without damage your expensive controlboard.
Instructions:
1. Connect Power to the power supply, pay attention to the positive and negative.
2. Connect Hotbed to the heating line of the hot bed, pay attention to the positive and negative.
3. Direct digital control signal
4. Connect -Bed+ to the control signal output from Ramps1.4 or MKS motherboard MOS tube.
5. Two sets of control signals can only be connected to one set.
size:9x6.6x3.2cm
Material:PC+metal
colour:Red+black
Package Contents:
1 x MOS uleOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
MOS tube with excellent performance.
Large heat sink, the maximum current can reach more than 30A.
You can directly use the hot bed output signal control of Ramp1.4 and MKS series motherboards
Power a big heat elements without damage your expensive controlboard.
Instructions:
1. Connect Power to the power supply, pay attention to the positive and negative.
2. Connect Hotbed to the heating line of the hot bed, pay attention to the positive and negative.
3. Direct digital control signal
4. Connect -Bed+ to the control signal output from Ramps1.4 or MKS motherboard MOS tube.
5. Two sets of control signals can only be connected to one set.
size:9x6.6x3.2cm
Material:PC+metal
colour:Red+black
Package Contents:
1 x MOS uleOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
