Bộ Chuyển Đổi Pci Express Usb 3.0 Mini Pci-E Sang Usb 4 Cổng
0 Đánh Giá
0 Đã Bán
111
498.000 đ
Xem sản phẩm trên ShopeeQuốc tế
thứ sáu 02/07/2021 lúc 11:04 CH
1. This Mini PCI-Express USB 3.0 Host Controller Card complies with the Universal Serial Bus 3.0 specification revision 1.0 and PCI Express Generation 2 specification.
2. The Super Speed USB 3.0 standard, operating at 5 Gbps full-duplex e, is 10 times faster than USB 2.0 High-Speed (480 Mbps) standard.
3. The product is also backward compatible with current USB 2.0 devices running at High-Speed (480 Mbps), Full-Speed (12 Mbps), and Low-Speed (1.5 Mbps) es.
4. This product is an perfect choice for any PCI-Express expansible embedded or Mini system needing for larger volume and higher speed data transfer connectivity with USB devices, such as external Hard Disk Drive, Solid State Drive (SSD), optical drive, high definition video camera, etc
5. NOTE: Because MINI PCI-E does not have a 5V power supply, it cannot directly supply power to the USB, so you must plug in the SATA power cord to work normally. (Excluding SATA power cord)
NEC main control chip which is based on the USB3.0 Association, also the main control of the third generation 2 port D720202.
The expansion card can support for LINUX OS.
The expansion card uses the capacitance of the solar lure, which greatly ensures the stability of the USB power supply.
Compliant with PCI-Express Specification Version 2.0
Compliant with USB 3.0 Superspeed Specification Version 1.0
Compliance with xHCI specification version 1.0
Master chip: NEC UPD720202
Maximum transfer rate is up to 5Gbps, much higher than USB2.0's 480Mbs, up to 10 times
Backward compatible with USB2.0, USB1.1, USB1.0
Transmission rate:5000/480/12/1.5Mbps
Built-in SATA power-on interface
Support USB hot swapping
Supported OS:for Windows XP/2003/Vista, for Win7/Win8/Win10, for Linux, etc.
el Number:Mini PCIE to Front Panel 19pin/20pin USB 3.0 Expansion Card
Power supply interface: SATA
Applicable interface:Mini PCI-E interface
Product interface 1:USB 3.0 19/20 Pin x 2
Product interface 2:15Pin SATA power port x 1
size:50x30x10mm
Material:PCB+metal
colour:green
Package Contents:
1 x Mini PCI-Express to USB3.0 Host Controller Card
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
2. The Super Speed USB 3.0 standard, operating at 5 Gbps full-duplex e, is 10 times faster than USB 2.0 High-Speed (480 Mbps) standard.
3. The product is also backward compatible with current USB 2.0 devices running at High-Speed (480 Mbps), Full-Speed (12 Mbps), and Low-Speed (1.5 Mbps) es.
4. This product is an perfect choice for any PCI-Express expansible embedded or Mini system needing for larger volume and higher speed data transfer connectivity with USB devices, such as external Hard Disk Drive, Solid State Drive (SSD), optical drive, high definition video camera, etc
5. NOTE: Because MINI PCI-E does not have a 5V power supply, it cannot directly supply power to the USB, so you must plug in the SATA power cord to work normally. (Excluding SATA power cord)
NEC main control chip which is based on the USB3.0 Association, also the main control of the third generation 2 port D720202.
The expansion card can support for LINUX OS.
The expansion card uses the capacitance of the solar lure, which greatly ensures the stability of the USB power supply.
Compliant with PCI-Express Specification Version 2.0
Compliant with USB 3.0 Superspeed Specification Version 1.0
Compliance with xHCI specification version 1.0
Master chip: NEC UPD720202
Maximum transfer rate is up to 5Gbps, much higher than USB2.0's 480Mbs, up to 10 times
Backward compatible with USB2.0, USB1.1, USB1.0
Transmission rate:5000/480/12/1.5Mbps
Built-in SATA power-on interface
Support USB hot swapping
Supported OS:for Windows XP/2003/Vista, for Win7/Win8/Win10, for Linux, etc.
el Number:Mini PCIE to Front Panel 19pin/20pin USB 3.0 Expansion Card
Power supply interface: SATA
Applicable interface:Mini PCI-E interface
Product interface 1:USB 3.0 19/20 Pin x 2
Product interface 2:15Pin SATA power port x 1
size:50x30x10mm
Material:PCB+metal
colour:green
Package Contents:
1 x Mini PCI-Express to USB3.0 Host Controller Card
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.