Bộ chuyển đổi M.2 SSD NVME sang USB Type-A 3.1 thế hệ 2 chip cầu khóa M2 SSD M dành cho Windows XP/7/8/10/MAC OS
0 Đánh Giá
Đã Bán 0
158
376.000 đ
Mua ngay trên Shopee
Cài đặt Bigbuy360 ExtensionQuốc tế
Cập nhật: thứ ba 04/08/2026 lúc 01:18 CH
LỊCH SỬ GIÁ SẢN PHẨM
Đang tải lịch sử giá...
SO SÁNH GIÁ
MÔ TẢ SẢN PHẨM
Chip: RTL9210 TYPE C 3.1 chip, support the mainstream nvme pcie m2 hard disk on the market
Chip advantage: The main control is low power consumption. Compared with the old JMS583, the main control temperature will be lower, and the power consumption will be much smaller. That is to say, the high operating temperature of NVME SSD is relatively reduced, and we The obtained data test shows that the same device from the same SSD has been tested with JMS583 / RTL9210, which is about 200MB / s faster than the former.
External interface: USB3.1 Type-A In-line interface form is backward compatible with USB3.0 USB2.0 interface (supports USB2.0 and 3.0 interface, of course, you can use 2.0 2.0 and 3.0 3.0)
Read speed: 1000MB / s (This data is for reference only) the actual read speed is mainly related to SSD and equipment. The same equipment test results from different SSDs are different.
Product Name: NVME to USB3.1 type-A in-line adapter
Support SSD: M.2 NVME protocol solid state drive
(Only supports PCIe x2 and PCIe x4 NVME protocol M.2 NGFF SSD, not support PCIe x2 and PCIe x4 AHCI protocol M.2 NGFF SSD, not support B + M key SATA protocol M.2 NGFF SSD)
Colour:Black
Material:PCB
Size:11x2.3cm
Package Contents:
1 * Adapter Card
1 * screwdriver
1 * heat sinkOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Chip advantage: The main control is low power consumption. Compared with the old JMS583, the main control temperature will be lower, and the power consumption will be much smaller. That is to say, the high operating temperature of NVME SSD is relatively reduced, and we The obtained data test shows that the same device from the same SSD has been tested with JMS583 / RTL9210, which is about 200MB / s faster than the former.
External interface: USB3.1 Type-A In-line interface form is backward compatible with USB3.0 USB2.0 interface (supports USB2.0 and 3.0 interface, of course, you can use 2.0 2.0 and 3.0 3.0)
Read speed: 1000MB / s (This data is for reference only) the actual read speed is mainly related to SSD and equipment. The same equipment test results from different SSDs are different.
Product Name: NVME to USB3.1 type-A in-line adapter
Support SSD: M.2 NVME protocol solid state drive
(Only supports PCIe x2 and PCIe x4 NVME protocol M.2 NGFF SSD, not support PCIe x2 and PCIe x4 AHCI protocol M.2 NGFF SSD, not support B + M key SATA protocol M.2 NGFF SSD)
Colour:Black
Material:PCB
Size:11x2.3cm
Package Contents:
1 * Adapter Card
1 * screwdriver
1 * heat sinkOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.