1 Bộ Bánh Răng 3d Mk8 40 Răng Bằng Nhôm Pha Lê Thủy Tinh
0 Đánh Giá
0 Đã Bán
22
491.000 đ
Xem sản phẩm trên ShopeeQuốc tế
chủ nhật 23/05/2021 lúc 04:30 CH
1 set aluminum extrusion block & 1 pcs Carbon crystal silicon platform glass: Colour: black & gray, Material: EPE & aluminum alloy
[Tougher Adhesive] The el sticks firmly to the surface of the glass at high temperatures to avoid the problem of curled edges during 3D printing.
[Higher reliability] 8 Mohs hardness, heat resistance up to 400 degrees Celsius; 2019 upgrade; 4 mm thick, durable more than 3 mm.
[Easy to use] Use clip to fix on hot bed. Just clean with water or alcohol.
[Compatibility] It is applicable to the hot bed of Creality Ender 3, Ender 3 Pro, Ender 3X, Ender 5 3D printer.
[Manual removal] The el can be easily removed by hand without tools.
The gray metal extruder is an upgrade replacement part for Ender 3, Ender 3 Pro,Ender 5,CR-10, CR-10S, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus.
Works better than plastic stock extruder, make loading filament much easier. Even smoother than the red metal extruder.
Compatible with PLA/ABS/Wood/TPU/PTEG, 40 Teeth drive gear feeds the 1.75mm filament very smoothy.
Easy to Install. The extruder diy kit comes with a instruction on how to put it together, which makes it more easy to install.
Ender 3 CR-10 Aluminum MK8 Bowden Extruder 1.75 Filament.
Specifications:
Drive Gear:40 Teeth
Specifications:
Colour: black & gray
Material: EPE & aluminum alloy
Size: 275 x 275 x 30mm
Package Contents:
1 set x aluminum extrusion block
1 x Carbon crystal silicon platform glass
Note:
1. The first layer has a hardness of 0.5H, which is easy to scratch, but it will not affect the adhesion of the el.
2. After wiping with alcohol, the color will change, but it will not affect its normal use.
3. Do not manually Press the platform repeatedly to avoid severe sweat, as sweat can interfere with 3D printing.Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
[Tougher Adhesive] The el sticks firmly to the surface of the glass at high temperatures to avoid the problem of curled edges during 3D printing.
[Higher reliability] 8 Mohs hardness, heat resistance up to 400 degrees Celsius; 2019 upgrade; 4 mm thick, durable more than 3 mm.
[Easy to use] Use clip to fix on hot bed. Just clean with water or alcohol.
[Compatibility] It is applicable to the hot bed of Creality Ender 3, Ender 3 Pro, Ender 3X, Ender 5 3D printer.
[Manual removal] The el can be easily removed by hand without tools.
The gray metal extruder is an upgrade replacement part for Ender 3, Ender 3 Pro,Ender 5,CR-10, CR-10S, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus.
Works better than plastic stock extruder, make loading filament much easier. Even smoother than the red metal extruder.
Compatible with PLA/ABS/Wood/TPU/PTEG, 40 Teeth drive gear feeds the 1.75mm filament very smoothy.
Easy to Install. The extruder diy kit comes with a instruction on how to put it together, which makes it more easy to install.
Ender 3 CR-10 Aluminum MK8 Bowden Extruder 1.75 Filament.
Specifications:
Drive Gear:40 Teeth
Specifications:
Colour: black & gray
Material: EPE & aluminum alloy
Size: 275 x 275 x 30mm
Package Contents:
1 set x aluminum extrusion block
1 x Carbon crystal silicon platform glass
Note:
1. The first layer has a hardness of 0.5H, which is easy to scratch, but it will not affect the adhesion of the el.
2. After wiping with alcohol, the color will change, but it will not affect its normal use.
3. Do not manually Press the platform repeatedly to avoid severe sweat, as sweat can interfere with 3D printing.Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.